Industries

Aquaponics | Aquaculture | Aeration

We offer a range of blowers and aeration diffusers to the aquaculture industries, specifically for aquaculture, prawn farming, abalone farming, tilapia and many more. The blowers we offer can aerate your tanks up to 8m deep, however if air delivery beyond the 8m mark is required, we have a range roots blowers that can get the job done.

In general, blowers are driven by electric motors in a direct driven configuration. For emergency air we have supplied belt driven blowers driven by petrol motors in the event of power failure.

Floatation Tables

A floatation table is designed with a perforated type bed with air blowing from below to facilitate the handling and moving of products with large flat surfaces. The air film creates an air cushion between the working product and the table bed allowing for easy sliding movement of products. Our range centrifugal fans or side channel blowers are ideal products for your project.

Air Knife Drying

Air knife drying systems requires a higher velocity at the air knife discharge to get a quality drying “sweep” from your air slots. Depending on the width, length and quantity of slots we recommend either side channel blowers or smaller high pressure centrifugal fans to deliver the correct amount of air at the correct pressure to achieve your required velocity.

Waste Water Aeration

We offer a range of blowers and aeration diffusers to the wastewater industries. Our scope of supply cover side channel and roots blowers. We can offer blowers to aerate your tanks up to 8m deep and our range of roots blowers can offer air delivery beyond the 8m water mark if required.

Compost Tea Aeration

We offer a range of blowers and aeration diffusers to the wastewater industries. Our scope of supply cover side channel and roots blowers. We can offer blowers to aerate your tanks up to 8m deep and our range of roots blowers can offer air delivery beyond the 8m water mark if required.

Pneumatic Conveying

Pneumatic Conveying is used to move products form one point to another. Products from Flour to plastic pellets can be moved using high pressure blowers from hoppers, fitted with venturi systems to settling cyclone bins, direct from the suppliers packaging to the plastic injection moulding machines. Use a negative pneumatic system to vacuum products from your supplier’s bulk packaging directly to your production process. The possibilities of pneumatic transfer are endless. Use a high-pressure centrifugal fan, side channel blower or roots blower to transfer your product.